水泥电线杆拆除技巧及方法，一般很多单位会遇到破损的水泥电杆进行拆除，那么掌握的好的水泥电杆拆除方法可以省心、省事、省时间。下面水泥电杆厂技术人员来介绍下水泥电杆拆除技巧及方法。

Demolition techniques and methods for cement power poles. Generally, many units will encounter damaged cement power poles for demolition. Therefore, mastering good methods for dismantling cement power poles can save worry, effort, and time. Below, technicians from the cement pole factory will introduce the techniques and methods for dismantling cement poles.

首先在顶上绑一根绳子，然后后就可以用铁锤砸水泥电杆的底部的水泥了，把底部一圈的水泥全部砸掉只剩钢筋（有20厘米就可以），然后用原来绑好的绳子往地势空旷的一边拉住，好有三个人，这时候用剪钢筋的剪刀或手提切割机切断钢筋，值得注意的是要先弄断的钢筋和拉绳子的方向是相反的，也就是说如果拉绳子的人站在东边，那你就得先弄断西边的钢筋，在剪断的过程中，拉绳子的人一定要用力拉。

First, tie a rope to the top, and then you can use a hammer to smash the cement at the bottom of the cement pole, removing all the cement in the bottom circle and leaving only the steel bars (20 centimeters is enough). Then, use the originally tied rope to pull towards the open side of the ground, with at least three people. At this time, use scissors or a hand-held cutting machine to cut the steel bars. It is worth noting that the direction of the steel bars to be broken first and the direction of the rope to be pulled are opposite, That is to say, if the person pulling the rope is standing on the east side, you must first break the steel bars on the west side, and during the cutting process, the person pulling the rope must pull hard.

重要的一点是，拉绳子的人和水泥电杆底部的距离必须大于电线杆的高度，也就是说，如果水泥电杆有5米高，那么拉绳子的人必须离水泥电杆的距离是7米以上，防止电线杆倒下来后砸到人。

An important point is that the distance between the person pulling the rope and the bottom of the cement pole must be greater than the height of the pole. That is to say, if the cement pole is 5 meters high, the person pulling the rope must be at least 7 meters away from the cement pole to prevent it from falling and hitting people.